In house
One team, one floor, no outsourcing
Every digitiser is an employee of our group. Work is never passed to freelancers or marketplace sellers, so the standard does not change from one order to the next.
Embroidery digitising · prices in AUD · since 2015
Your logo, sewn right the first time it goes in a hoop
PlixaLabs is an embroidery digitising company for decorators, distributors and embroidery shops in Australia, and for anyone with one logo to sew. A person plans every stitch in your file, a second person checks it, and it reaches you in 4–8 hours as DST, PES, EXP or whatever your machine reads. Flat A$15 to start, revisions unlimited, no minimum order.
- Price emailed in 30 minutes
- Flat price per design
- Standard 4–8 hours
- Unlimited revisions
- 24/7
Zorixo Ventures, LLC · Invoiced in AUD · No Australia office, so email is fastest · See all prices
- SimpleA$15
- MediumA$20
- ComplexA$27
One flat price per design, whatever the stitch count, with every machine format included. Caps, 3D puff, jacket backs, patches, appliqué, Coloreel and vector conversion each have their own flat price. Rush or super rush adds 50%.
The work
What customers sent us, and what we sent back.
Drag the slider on each one. Left is the artwork as it arrived, right is the file running on a machine.
Before
Digitised
Embroidery digitising
Soccer club crest with laurels
Laurel leaves, a shield and lettering, planned so the small detail is still readable at three inches.
Before
Digitised
Embroidery digitising
Tiger mascot, full-colour fill
A full-colour mascot where fill direction, not outlines, carries the shading of the artwork.
Before
Vector
Vector conversion
Blurry logo redrawn as a vector
A logo that arrived as a 400 pixel screenshot, redrawn by hand as clean vector artwork.
The difference
Thread breaks are usually a file problem.
An automatic converter traces the edges of your artwork and fills them in. It has no opinion about the fabric you are sewing on, and the fabric is the only thing that matters once the hoop is in the machine. Here is what a person decides instead.
Density set for the fabric
Too dense and the fabric puckers. Too light and the design looks thin. Density follows the weight and weave of what you are sewing on.
Underlay that holds it up
Without the right underlay, designs sink into fleece, piqué and terry and the edges go soft.
Push-pull compensation
Fabric moves while it is stitched, so shapes are drawn wrong on purpose to finish the right size.
Sewing order that behaves
Fewer jumps and colour changes, and no later block distorting one already sewn.
Tie-ins and tie-offs
Locking stitches, so thread does not unravel in production or in the first wash.
Try It Yourself Runs in your browser
See your own logo drawn as stitches.
Drop a logo in and this reduces it to thread colours and redraws it stitch by stitch, here in your browser. It shows you where a design will fight you: fine lettering, hairline strokes, photographic shading. Nothing is uploaded. The image never leaves this tab.
Drag a logo here, or pick a file. PNG, JPG, SVG or WebP.
Or try
This is a simulation, not a stitch file. It takes a few milliseconds and it cannot set underlay, push-pull compensation or sewing order, which is why automatic conversion fails on real garments. A digitiser on our team plans the production file by hand and sends it in 4–8 hours from A$15, in DST, PES, EXP or whatever your machine reads.
Reading the artwork…
…
Est. stitches
…
Run time at 800 spm
…
Complexity
…
Flat price
Ordering
You get the price before any work starts.
Send the artwork
JPG, PNG, PDF, AI, EPS or SVG. Tell us the garment, the finished size and your machine or format.
We confirm the price
A flat price, in 30 minutes, before anybody starts. No stitch-count surprise on the invoice.
A digitiser plans it by hand
Someone on our own team sets every stitch path, density, underlay and colour stop. Not a plugin, and not a freelancer.
File and preview in 4–8 hours
Every format you need, plus the stitch simulation. Rush 2–4 hours or super rush 1–2 hours for 50% more.
100++
People on the team
Employed by our group, not contracted.
40,000
Designs a month
Our own figure, not an audited one.
9 yrs
Average experience
The most senior has 26.
2015
Digitising since
The companies were incorporated in 2024.
PlixaLabs headcount and order figures, September 2026.
Who does it
Your files, made by our own digitising team.
Orders are invoiced by Zorixo Ventures, LLC, our US company, with prices shown and charged in AUD. The files are made by our own team, employees of our group company in Bengaluru. Nothing goes to a freelancer or a marketplace, which is why the same hand can pick up a repeat order a year later. The pictures below are illustrations, not photographs of our office or our staff.
24/7
The lights never go off
Shifts hand over around the clock, so a logo sent at closing time is already on somebody's screen.
Specialists
Crews for the tricky jobs
A structured cap front, a 3D puff logo or a Coloreel design goes to a digitiser signed off on that technique.
AUD pricing
One price, in your currency
Every price on the site is charged in AUD, with an itemised invoice on every B2B order and Net-30 on approved trade accounts.
Customers
What embroidery businesses say
about working with us.
"The embroidery file from PlixaLabs ran beautifully on our machines. The density, underlay and small details were handled professionally. We hardly needed any changes after the first sample."
Oliver Bennett
Workwear Studio, London
"Fast, professional and consistent. We’ve sent several designs to PlixaLabs, and every file has been production-ready. Their attention to detail saves us considerable sampling and correction time."
Emily Clarke
Stitch Studio, Leicester
"A reliable company for both embroidery digitising and vector conversion. The quality is consistently good, communication is straightforward, and deadlines are respected. I would confidently recommend PlixaLabs."
Thomas Wright
Apparel Services, Glasgow
Also on the site
If you want the detail.
Industries we digitise for
Free tools, no sign-up
FAQ
The questions we actually get asked.
One flat price per design in AUD: A$15 simple, A$20 medium and A$27 complex, never a charge per 1,000 stitches. Caps, 3D puff, jacket backs, patches, appliqué and Coloreel each have their own listed price on the price list.
Standard turnaround is 4–8 hours, rush 2–4 hours and super rush 1–2 hours, with rush and super rush adding +50%. The team works 24/7, so artwork sent at the end of your day can be back before you open.
Tell us your machine and we send the matching format, such as DST, PES, JEF, VP3, EXP, HUS or TAP. Every format is included at no extra cost, along with a stitch simulation preview.
A digitiser employed by our production company, Zorixo Creations Private Limited, in Bengaluru, India. Every file is built by hand, never auto-converted, and checked by a second digitiser before it reaches you.
Orders are invoiced by Zorixo Ventures, LLC, our US company, with prices shown and charged in AUD. We have no office or phone line in Australia, so email reaches the team fastest.
Send a photo of the sew-out with the fabric and machine details. Revisions are unlimited with no time limit, so we adjust density, underlay or stitch order until it runs cleanly.
More answers on the embroidery digitising FAQ. We have no office or phone line in Australia, so email reaches the team fastest.
Get your design digitised from A$15.
Send your artwork and we confirm the price before any work starts. Standard files arrive in 4–8 hours, rush in 2–4 hours and super rush in 1–2 hours, 24/7.
Hand-digitised by our own employed team, never auto-digitised
Unlimited revisions, no time limit
Every machine format and a stitch simulation preview included
Prices in AUD, invoiced by Zorixo Ventures, LLC
How your order works
1
Upload your artwork
Any format. Tell us the garment, finished size and machine.
2
We confirm the price
One flat price per design, agreed before we start.
3
File back in 4–8 hours
All formats plus a stitch simulation preview. Rush 2–4 hours (+50%).
4
Unlimited revisions
Reply to your delivery email with any change.
· Trade accounts · Digitising since 2015